Single Loop Wire Forming Spiral Binding Machine

    The wire is unwound from a spool, straightened and smoothed by the special rectifying tools of the machine and then is guided via guide-rollers to the mandrel which forms the spiral and regulates the spiral diameter. The pre-punched product is placed onto the book supports. By starting the machine the machine the spiral is introduced into the perforation. The needed spiral length can be adjusted at the electronic wire length control. The machine stops automatically when the wire reaches the required length and then the spiral is cut off and both spiral ends are bend inwards.The machine is ready for the next cycle.
• Forming different wires to spiral and binding onto the book at the same time. ,

• Through mold and tooth pitch can run different spec requirements.

• Book binding and wire forming spiral finished at the same time, convenience and efficiency. 

• Can cut off and close up automatically after book binding completed • Books drop onto the collection tank after binding completed automatically, operator only needs to put it to the orientation.
• Up to 3 seconds per book This machine used widely binding for notebook,exercise book,hang calender, desk calendar, loose-leaf,etc.It can auto wire forming spiral, auto book cluster, auto book drop and auto book collection. It is a perfect high speed spiral binding machine.